Product Show

Location:Home >> Products >> Switching Power Supply Series

T-100

Switching Power Supply Series
Keywords:
100w switching power supply
Product Details

Model
Performance
T-100A
T-100D
CH1
CH2
CH3
CH1
CH2
CH3
DC output voltage
5V
15V
-15V
5V
12V
24V
Output voltage tolerance(Note 2)
±2%
±6%
+2,-10%
±2%
±2,-6%
±6%
Rated output current
10A
2.5A
1A
6A
2A
2A
Output current range
2-12A
0.2-2.5A
0.1-1A
0.5-6A
0.1-2A
0.1-2A
Ripple and noise(Note 3)
80mVp-p
100mVp-p
50mVp-p
50mVp-p
100mVp-p
100mVp-p
Inlet stability(Note 4)
±0.5%
±1%
±1%
±0.5%
±1%
±1%
Load stability(Note 5)
±1%
±5%
±5%
±0.5%
±5%
±5%
DC output power
100W
100W
Efficiency
70%
72%
DC voltage adjustable range
CH1:+10,-5%
CH1:+10,-5%
Input voltage range
85~132VAC/170~264VAC selected by switch
 47~63Hz;240~370VDC
Input current
0.8A/115V       0.45A/230V
Surge Current
Cold-start current18A/115V      36A/230V
Leakage Current
<0.5mA/240VAC
Overload protection
105%~150% type:pulsing hiccup shutdown Reset:Automatic recovery 
over-voltage protection
……
High temperature protection
……
temperature coefficient
±0.03%℃(0~50℃) ON+5V OUTPUT
Start-up,rise,hold up time
200ms,50ms,16ms
shock resistance
10~500Hz,2G 10min./1circle,Period for 60min.,Each axes
Withstand voltage
Input and Output internal:1.5KvAC,input and enclosure:1.5KvAC,
output and enclosure:0.5KvAC
Insulation Resistance
Input and Output internal: input and enclosure,output and 
enclosure:500VDC/100M Ohms
work Temperature/humidity  
-10℃~+60℃(Refer to output derating curve),20%~90%RH
storage temperature /humidity
-20℃~+85℃,10%~95%RH
Outline dimension
199*110*50mm  CASE:903
Weight
0.4Kgs
Safety standards
Satisfy UL1012        REQUIREMENT    (NOT QPPLY FOR THE MARK)
EMC Standards 
Satisfy FCC PART15 J CONDUCT 10N CLASS A
Note: 
1. The above parameters test conditions: 230VAC input, rated load, 25 ℃ 70% RH Humidity.
2.Tolerance: includes set up tolerance, line stability and load stability (Note 5).
3.The ripple test: 20MHz with A12 "twisted pair, interrupted with a 0.1uF & 47uFcapacitor circuit. 
4.The incoming line voltage stability test: the minimum full load voltage of the incoming line to the highest voltage.
5.Load stability test: the load from 0% to 100%.Others output is 60% rated load.

 

Drawing: