Product Show

Location:Home >> Products >> Switching Power Supply Series

S-200

Switching Power Supply Series
Keywords:
switch power supplies
Product Details

Model
Performance 
S-200-5
S-200-12
S-200-15
S-200-24
DC output voltage
5V
12V
15V
24V
Output voltage tolerance(Note 2)
±2%
±1%
±1%
±1%
Rated output current
40A
16.5A
13.3A
8.5A
Output current range
0-40A
0-16.5A
0-13.3A
0-8.5A
Ripple and noise(Note 3)
180mVp-p
120mVp-p
120mVp-p
120mVp-p
Inlet stability(Note 4)
±0.5%
±0.5%
±0.5%
±0.5%
Load stability(Note 5)
±1%
±0.5%
±0.5%
±0.5%
DC output power
200W
200W
200W
200W
Efficiency
75%
79.5%
80%
81.5%
DC voltage adjustable range
4.75-5.5V
10.8-13.2V
13.5-16.5V
21.6-26.4V
Input voltage range
85~132VAC/170~264VACselected by switch 47~63Hz 47~63Hz;248~370VDC
Input current
4.2A/115V  2.2A/230V
Surge Current
Cold-start current 35A/115V 60A/230V
Leakage Current
<0.5mA/240VAC
Overload protection
105%-150% type:pulsing hiccup shutdown Reset:Automatic recovery,115%-135% Reset:Automatic recovery
High temperature protection
……
temperature coefficient
±0.03%℃(0~50℃)
Start-up,rise,hold up time
200ms,100ms,20ms
shock resistance
10~500Hz,2G 10min/1circle,Period for 60min.,Each axes
Withstand voltage
Input and Output internal:1.5KvAC,input and enclosure:
1.5KvAC,output and enclosure:0.5KvAC
Insulation Resistance
Input and Output internal: input and enclosure,output and 
enclosure:500VDC/100M Ohms
work Temperature/humidity   
-10℃~+60℃(Refer to output derating curve),20%~90%RH
storage temperature/humidity
-20℃~+85℃,10%~95RH
Outline dimension
150*140*86mm CASE:907
Weight 
1.3Kgs
Safety standards 
Satisfy the requires of UL1012  
 EMC Standards
Satisfy FCCPART15JCONDUCTION CLASS A
Note: 
1.The above parameters test conditions: 230VAC input, rated load, 25 ℃ 70% RH Humidity.
2.Tolerance: includes set up tolerance, line stability and load stability (Note 5).
3.The ripple test: 20MHz with A12 "twisted pair, interrupted with a 0.1uF & 47uFcapacitor circuit.
4.The incoming line voltage stability test: the minimum full load voltage of the incoming line to the highest voltage. 
5.Load stability test: the load from 0% to 100%.
6.C3,4,41 must remove.  

 

Drawing: